Canada's National Mural Mosaic Print/Tile Combo

mounting your tile into the matt before framing

Step 1

Position your tile so the square cut out lines up with your tile along with the backing board (cardboard backing is supplied with your matted print purchase, but you may want to use foam core or matt board if available)

Step 2

Remove the mat and carefully mark out the outline of your tile

Step 3

Carefully cut out the marked square for your tile.

Step 4

Place your tile into the cut out, It should fit perfect, making it flush with the backing 

Step 5

Flip over the backing board and secure the tile with tape, add spacers if needed

Step 6

 Assemble the matted print with your tile/backing, should line up perfectly and now will be flush, ready for framing.

Step 7

 Slip into a 22″ x 28″ frame.
(tip: check out you local thrift store for a great deal)

Enjoy!